ESAB REBEL EMP 215ic multi-process Welder MIG/TIG/Stick 0558102240

  • $ 2,649.00

The ESAB® Rebel™ EMP 215ic is a complete 240 amp MIG, DC TIG, and Stick welding package. The Rebel operates off of standard household 120 volt OR 230 volt input power. Weighing only 40 pounds, the 215ic is a light industrial welding machine that is truly portable. It comes complete with everything you need to start MIG, TIG, or Stick welding, except the shielding gas.

Rebel's advanced, welder-inspired design sets it apart from all other multiprocess welders on the market. ESAB starts with sMIG technology that actually adapts the MIG arc characteristics to your unique welding style. Should you change your technique while welding, sMIG will automatically adjust on the fly. Exceptional lift-arc DC TIG performance down to 5 amps. Smooth, stable Stick welding arc performance is consistent even on difficult-to-weld E6010 and E7018 electrodes. Combine all of this with a bright, bold 4.3 inch LED color display and you've got a go anywhere, do anything multiprocess welder that is second to none.

  • MIG (GMAW)
  • Flux Cored (FCAW)



  • MULTI-PROCESS MIG, Flux-Cored, DC TIG, & Stick 
    • Professional-grade MIG performance, including flux-cored 
    • Exceptional lift arc DC TIG performance down to 5 amps 
    • Excellent Stick performance, including 6010/6011 cellulosic and 308L electrodes 
    • Compatible with OPTIONAL spool gun for welding aluminum
    • Exclusive, built-in dynamic arc control that constantly monitors complex arc characteristics adapting to your technique to provide a smooth, stable arc and superior, repeatable welds 
    • Produces less spatter and weld defects 
    • Two modes: basic and advanced - Basic mode reduces the MIG learning curve: set wire diameter and material thickness and you're ready to weld.
    • Advanced mode gives full control to adjust the arc characteristics to your liking
    • Runs on 120V or 230V single-phase input power (adapter included) 
    • Top-level performance across all processes - even on 120V power 
    • Auto-detect knows what type of input power the machine is connected to 
    • Runs off a 3.7 kVA (120V) or 7.5 kVA (230V) generator
    • Intuitive LCD/TFT display 
    • Well protected by front handles and a hefty composite bezel 
    • Easily switch from one process to the next 
    • Built-in on-screen manual, spare parts listing, and welding parameters guide 
    • Multi-lingual capabilities, including English, French, and Spanish
    • Five-handle roll cage for easy transport and handling 
    • Steel unibody housing for increased protection and superior durability 
    • Recessed body panels for increased strength


Comes Complete With:
  • ESAB® Rebel™ EMP 215ic MIG/TIG/Stick welder
  • Tweco Fusion 180 MIG gun with 10-ft. (3-m) cable
  • Three spare MIG gun contact tips. 1 each in sizes .024, .030, .035
  • One V-Groove Drive Roll .024/.030, and one V-Knurled drive roll (for flux-cored welding) .030/.035
  • 17V style TIG torch
  • Tweco 200A electrode holder with 13-ft. (4-m) cable
  • Four general purpose 6013 Stick electrodes
  • ESAB 70S-6 .030 4-in., 2-lb. sample spool
  • Tweco ground clamp with 10-ft. (3-m) leads
  • Victor argon flowgauge regulator with 12.5-ft. (3.8-m) gas hose
  • 230V plug, and 115V/20A plug adapter

NOTE: The Rebel EMP is a DC TIG welder only. It CANNOT TIG weld aluminum.